The Commercial Vehicle Safety Alliance’s (CVSA) recently announced its annual International Roadcheck is scheduled for May 13-15.
International Roadcheck is a high-visibility, high-volume commercial motor vehicle inspection and regulatory compliance enforcement initiative that takes place over three days in the U.S., Canada, and Mexico and.
During those three days, law enforcement personnel will inspect commercial motor vehicles and drivers at weigh/inspection stations, temporary sites and mobile patrols to verify regulatory compliance. Data from the 72 hours of International Roadcheck will be collected and the results will be released this summer.
Each year, International Roadcheck places special emphasis on a driver violation category and a vehicle violation category. During Roadcheck, inspectors will primarily conduct the North American Standard Level I Inspection, a 37-step procedure that includes an examination of driver operating requirements and vehicle mechanical fitness. While all 37 steps will be completed, as usual, inspectors will also pay close attention to the driver’s record of duty status (RODS) and the vehicle’s tires.
Driver Focus Area
During the driver portion of an inspection, inspectors check the driver’s documents, license or commercial driver’s license, medical examiner’s certificate and skill performance certificate (if applicable), record of duty status, Drug and Alcohol Clearinghouse status (in the U.S.), seat belt usage, and alcohol and/or drug impairment. If an inspector identifies driver out-of-service violations, they place the driver out of service, restricting that driver from operating their vehicle.
Vehicle Focus Area
During Roadcheck, inspectors will check tires’ tread depth and proper inflation. They will also be on the lookout for tire damage, such as air leaks, tread separation, cuts, bulges, sidewall damage and improper repairs.
RELATED NEWS: U.S. Roadcheck results: 7,920 vehicles & 2,151 drivers placed out of service
During the vehicle portion of the Level I Inspection, inspectors ensure the vehicle’s brake systems, cargo securement, coupling devices, driveline/driveshaft components, driver’s seat, fuel and exhaust systems, frames, lighting devices, steering mechanisms, suspensions, tires, wheels, rims, hubs, and windshield wipers are compliant with applicable regulations. Inspections of motorcoaches, passenger vans and other passenger-carrying vehicles also include the examination of emergency exits, seating, and electrical cables and systems in the engine and battery compartments.
A vehicle that successfully passes a Level I or V Inspection without any critical vehicle inspection item violations may receive a CVSA decal, which is valid for up to three months.
If out-of-service violations are found during an inspection, as outlined in the North American Standard Out-of-Service Criteria, the vehicle is restricted from operating until all out-of-service violations have been properly addressed.
In case of inclement weather or other limiting circumstances during the three days of International Roadcheck, a jurisdiction or an inspector may opt to conduct a limited Level II Walk-Around Driver/Vehicle Inspection or Level III Driver/Credential/Administrative Inspection, instead of a Level I Inspection. Level II and III Inspections are not eligible for a CVSA decal.
Credit: Source link
